Application Scenarios and Role of Metal Industrial Cleaning Defoamer Antifoam
The process of metal processing, the surface of metal materials will have a lot of impurities, dirt, dust, oil, etc., in order to reduce the impact on the metal processing process, the need to clean the metal materials, in addition to the production and processing need to use a lot of substances, such as cutting oil, is the use of residuals, but also needs to be cleaned of metal workpieces. In order to improve the cleaning efficiency of metal materials and metal workpieces, the need to use cleaning agents for cleaning, because most of the cleaning agent belongs to the surface-active additives, so it will produce a large number of bubbles, these bubbles not only will not improve the cleaning effect, but also bad, so you need to generally need to use the metal industrial cleaning defoamer.
Metal cleaning is not like any other cleaning industry, it is not true that the more foam there is, the better the metal is cleaned, there is no direct correlation between the two. Foam leads in the process of metal cleaning is not easy to clean, so that the difficulty of metal cleaning greatly increased, in addition, metal cleaning foam has a residue, foam to metal cleaning materials and workpieces to produce defects such as oil spots, color spots and rust scale, in this way, it is very easy to affect the quality of the metal products, if the foam is too much time, the foam will be attached to the metal workpieces or overflowing out of the tank, resulting in too much loss of cleaning agent If there is too much foam, the foam will adhere to the metal workpiece or overflow the tank, resulting in too much loss of cleaning agent and too high production cost.
So why use the metal working cutting fluid defoamer?
The benefits of using the metal industrial cleaning defoamer antifoam is obvious. Firstly, metal working cutting fluid defoamer can improves cleaning efficiency and ensures that stains and grease are thoroughly removed from metal surfaces. Secondly, defoamer antifoam reduce overflow during the cleaning process, protecting equipment from corrosion and prolonging its life. In addition, metal industrial cleaning defoamer helps to conserve water and detergent, as less foam means that the same cleaning effect can be achieved with a lower concentration of detergent.
RISE Defoamer
The metal cleaning defoamer developed by RISE Chemical is made of special modified polyether and silicone-containing raw materials compounded through a special process, which is easily soluble in water and is especially suitable for continuous defoaming and foam suppression under the conditions of high temperature, strong acid and alkali, high shear, and high pressure existence. Metal industrial cleaning defoamer has good resistance to high temperature, acid and alkali, no floating, no floating oil; defoamer can be used in a wide range of temperatures for a variety of harsh systems of foam elim.
